Single Shaft Shredder for HDPE Pipes and Profiles

Single Shaft Shredder for HDPE Pipes and Profiles
Configure an AMGS single shaft shredder for HDPE and PP pipe or profile scrap using actual pipe dimensions, wall thickness, loading method, target output and sample-test evidence.

Product details

AMIGE configures AMGS single shaft shredders for controlled size reduction of suitable HDPE and PP pipes, profiles, and other bulky rigid-plastic scrap. Model selection must use the actual polymer, pipe outside diameter, length, wall thickness, piece weight, nesting or bundling condition, loading method, required throughput, target output, and downstream process.

Use this page for an HDPE or PP pipe-shredding project. For general equipment construction and selection inputs, see the single shaft shredder machine page.

HDPE Pipe Feed Data Required Before Model Selection

A material name alone is not enough to select a shredder. Send photos or video with a scale and provide the following project data:

  • polymer and grade, plus any fillers or metal contamination;
  • minimum, common, and maximum pipe outside diameter;
  • pipe length and wall-thickness range;
  • piece weight and whether pipes are nested or bundled;
  • loading method and available feed orientation;
  • required throughput, target output, and downstream equipment.

The published feed-opening values below are machine opening dimensions. They are not guaranteed maximum pipe diameters or maximum feed-piece dimensions. Final feed geometry and any pre-cutting requirement must be confirmed from the real material and project layout.

How a Single Shaft Shredder Handles Rigid Pipe Scrap

A hydraulic pusher advances suitable pipe or profile pieces toward one cutting rotor. A sizing screen retains oversized material for further reduction before discharge. The feeding arrangement, rotor and blade configuration, screen opening, and downstream equipment must be confirmed from the real pipe geometry and project target.

To compare this application with other shredder configurations, review the industrial plastic shredder range. The HDPE pipe page remains the primary commercial page for this application.

Published AMGS Model and Configuration Range

The table below reproduces the current published AMGS configuration range. Machine dimensions, feed openings, rotor values, blade quantities, screen openings, power, and weight are reference values. Final configuration and performance must be confirmed in the project quotation.

Machine modelAMGS600/350AMGS800/400AMGS1000/450AMGS1200/450AMGS1500/500AMGS1800/500
Machine size L/W/H (mm)2000 × 1410 × 21002430 × 1720 × 24802880 × 2180 × 25703350 × 2300 × 26603500 × 2870 × 27003500 × 3170 × 2700
Feed opening (mm)630 × 985830 × 12401030 × 14401230 × 17001530 × 18001830 × 1800
Rotor diameter (mm)Ø350Ø400Ø450Ø450Ø500Ø500
Rotor speed (rpm)787878787878
Fixed blades (pcs)223445
Rotor blades (pcs)3951638199105
Screen opening (mm)30–10030–10030–10030–10030–10030–100
Hydraulic power (kW)2.234455
Main motor power (kW)2237557590110
Machine weight (kg)3500500070008000950011000

Parameter boundaries: The 30–100 mm figures are published screen-opening options, not a guarantee that every discharged piece will have a uniform dimension. No model-specific HDPE pipe throughput is claimed here. Throughput must be confirmed against the real feed, selected screen, loading method, and test conditions.

Plastic Pipe Shredding Reference Video

This reference video shows plastic pipe shredding. Its published metadata does not identify the polymer grade, AMGS model, pipe outside diameter, wall thickness, screen opening, test duration, or measured throughput. These values must come from a test sheet, project record, or engineering approval before they are presented as project evidence.

Choose Between Pipe Shredding and Secondary Pipe Crushing

Use a shredder for bulky pipe or profile size reduction and controlled feeding. If the next process requires a smaller feed, evaluate a plastic pipe crusher for secondary size reduction after the shredder. The final route depends on pipe geometry, required output, contamination, and the downstream washing or recycling line.

Application and Machine Images

The images below document equipment, rigid pipe pieces, shredded rigid plastic, machine details, and delivery scenes. Where a material grade or project model is not documented, the ALT text describes only what is visible.

Single shaft shredder machine on a factory floor
Single shaft shredder machine
Rigid plastic pipe pieces prepared for shredding
Rigid plastic pipe pieces prepared for a shredding project
Shredded rigid plastic pieces after size reduction
Shredded rigid plastic pieces
Gearbox fitted to industrial recycling equipment
Gearbox and drive detail
AMIGE company culture activity
AMIGE company culture activity
Industrial recycling machine prepared for delivery
Industrial recycling machine prepared for delivery
Industrial recycling equipment being loaded into a shipping container
Equipment loading for shipment
Industrial recycling equipment secured inside a shipping container
Equipment secured for shipment

HDPE Pipe Shredder FAQ

Does the published feed opening equal the maximum pipe diameter?

No. It is a machine-opening dimension. Maximum feed geometry depends on pipe outside diameter, length, wall thickness, nesting, loading orientation, and the selected configuration.

What HDPE pipe wall thickness can the shredder process?

A universal wall-thickness limit is not published. Send the actual diameter, wall thickness, length, weight, and material details for engineering review or a sample test.

Is throughput guaranteed by model or motor power?

No model-specific HDPE pipe throughput is published in the current evidence. Throughput must be confirmed against the real feed, screen opening, loading method, and test conditions.

Does a 30–100 mm screen guarantee uniform output size?

No. These are published screen-opening options. Actual discharged pieces vary with material, cutting conditions, and screen configuration.

Can the current video prove an HDPE pipe test?

It shows plastic pipe shredding, but the published video metadata does not identify the polymer, AMGS model, pipe dimensions, wall thickness, screen, or measured throughput.

What should I send for an RFQ?

Send material photos or video, polymer, pipe diameter, length, wall thickness, piece weight, nesting condition, contamination, loading method, required throughput, target output, and downstream process.

Request an HDPE Pipe Shredder Selection Review

Send your pipe photos or video, outside-diameter and wall-thickness range, maximum length, piece weight, required throughput, target output, and downstream process. AMIGE will review the feed and confirm whether a single shaft shredder, pre-cutting step, or downstream pipe crusher should be evaluated.

If You Need Any Industrial Solution ... We Are Available For You

Contact Us