The single-shaft shredder uses the interaction between the movable knife and the fixed knife, controls the output size through the screen to shred, shear, and squeeze the material. Process to a smaller particle size. It is often used for the fine crushing of various solid wastes. It can process the materials to a smaller particle size at one time, is widely used in the fields of resource regeneration, household garbage and garbage volume reduction. It has the characteristics of small discharge particle size, replaceable screen, wide material applicability and high efficiency.
Applicable materials
Various solid wastes such as domestic waste, waste plastics, electronic waste, waste fabrics, rubber tires, biomass and industrial waste etc.
Working principle:
The motor drives the knife shaft through the reducer to drive the moving knife to quickly rotate. The material entering the crushing chamber is pushed to the edge of the moving knife and the fixed knife by the feeder. The knife on the moving knife disk cooperates with the fixed knife to cut the material. Tear to crush, the material reaching the discharge size falls from the screen mesh to achieve the purpose of crushing and the unqualified material is brought back to the crushing area by the blade to continue crushing. The size of the knife, the distance between the knife and the fixed knife and the size of the screen mesh will affect the output size. The output size is designed according to customer requirements and the screen can be replaced to adjust the output size.
Performance characteristics
1. Unique tool design and customizable screen aperture to meet the size and output requirements of customers for processing finer materials.
2. Intelligent maintenance, convenient disassembly and replacement
Automatic lubrication, intelligent monitoring, abnormal alarm, automatic protection system for unbreakable objects. The combined rotor can be disassembled and replaced independently.
3. Advanced technology, high-end design advanced anti-loose technology, low failure rate. The tool materials are imported from Europe and have a long service life.
Equipped with PLC touch screen, high-end electrical components, better controllability.
4. Safe and reliable
Imported bearings and multiple sealing technology are adopted and the main materials are repeatedly heat treated and processed with high precision, which is safe and reliable.