What problems should be paid attention to when using single shaft shredder blades
1. Ensure the normality of machinery
If you want the single-shaft shredder blade to work normally, exert a powerful cutting effect and create precise working standards and effects, first of all, we must ensure the normality of the shredder. Therefore, one of the very important items before we work is Perform an overall inspection of the shredder, especially the safety performance of some important operating parts, especially whether the lubrication effect of the claws, hammers, blades, etc. is normal, because these are directly related to the normality of the shredder jobs.
2. Grasp the blade and temperature of the shredder during use
In the process of using the shredder, our construction personnel must have a high degree of professional skills. Sometimes they must pay great attention to the operation of the single-shaft shredder blade. How to find a blockage or a problem with the cutting edge should be shut down and cleaned in time. Replace the cutting edge to ensure the normal progress of the work and when we are overloaded, the temperature of the machine will be too high and the waste will be sprayed. At this time, we should remove the obstacles in time.
3. Pay attention to details after troubleshooting
When we encounter problems with the shredder and get the corresponding treatment, we are not filling immediately, but let the blade of the single-shaft shredder idling for a few seconds. If the filling immediately damages the equipment when the mechanical speed is too low, then there is Failure to return the belt at will will cause the speed to be too fast and cause the temperature to rise and explode.
4, It is very important to reinforce and check the blade during work
When our cutting work is going on for a long time, we must pay attention to stop regularly to reinforce the blade and the power machine. Unnecessary accidents occur. If it is a long-term flow operation, the blade of the single-shaft shredder must be placed on the machine base. It is more stable, and it is more convenient and safe to work. Therefore, only if the cutting edge is found to be passivated or cracked, curled, or open, the blade must be replaced in time, so as to ensure the smooth completion of the work and guarantee The high standard of segmentation.