How to operate the plastic granulator?
In the daily operation of the plastic granulator, due to insufficient knowledge of the operation, sometimes it will misoperation and cause mechanical failure. Therefore, the correct operation of the plastic granulator is conducive to prolonging its life. Then we are using the plastic granulator. What issues should be paid attention to?
1. Strictly follow the operating requirements when operating, and do not perform illegal operations in non-operating workstations. To ensure the reliability of the safety device, the safety protection measures of the machine must not be destroyed in pursuit of efficiency.
2. When the material temperature has not reached the set temperature and the holding time is not enough, the screw is not allowed to turn on and run.
3. Operate by operators who are trained and familiar with the structural performance and operating procedures of plastic machinery.
4. Pay attention to fire safety. The fire extinguisher should be placed near the equipment that uses heat transfer oil.
5. In the event of a malfunction or abnormal situation, the relevant personnel must be reported and handled by professional maintenance personnel. If an abnormal phenomenon that affects safety is found, press the emergency stop switch immediately.
6. Do not use low-quality regrind with metal impurities or silt. Do not place metal objects that may fall near the feed inlet to prevent aggravation of the screw and barrel, or jamming or damage.
7. Use hydraulic oil with cleanliness, viscosity and other indications that meet the requirements, and provide sufficient flow of cooling water for the oil cooler as required to prevent hydraulic components and pipelines from being blocked due to oil contamination or high temperature, and oil leakage and other damage Phenomenon.
8. The extruder should fill the reducer with lubricating oil that meets the requirements.
Our plastic granulator production line is mainly composed of a specially designed humanized feeder, a forced pressurized feeder, a scientific self-heating and energy-saving host, an auxiliary machine, an automatic screen changer, and a pelletizer. The basic characteristics of the production line In order to be efficient, energy-saving, economical, environmentally friendly, beautiful, practical, stable, and highly automated, the produced plastic particles have stable geometric dimensions, good gloss, no pores, and maximum protection from degradation. Various plastics are widely used in the factory. raw material.