Troubleshooting of plastic granulator
There are high temperatures in the barrel, protective cover, and die head of the equipment. Do not touch them to avoid burns.
It is strictly forbidden to mix foreign materials such as metal, sand and stone in the raw materials of the machine to avoid damage to the machine.
When cleaning the feed opening of the main engine, it is forbidden to use iron rods or iron pieces. It is forbidden to reach the feed opening, exhaust port, pulley and belt by hand to prevent the cutting of the iron and the fingers from cutting.
During the process of moving the automatic die head to the net, it must be operated by a single person, pay attention to the coordination of the left and right hands, and avoid moving the die head when pressing the net with your hand to prevent cutting your fingers.
When cutting water-cooled strips, it is strictly forbidden to wear gloves during the feeding process of the rubber strips to the pelletizer.
During the start-up process, it is strictly forbidden to stand on the front of the die, and it is strictly forbidden to watch the situation with your eyes close to the exhaust port. Wear protective glasses when necessary. Use a round tube or other tube to drain the gas and watch it from the side of the tube. Take precautions against gas or glue. Burns eyes.
The machine must be grounded reliably before it can be put into use.
No fire is allowed in the production site.